Tile Adhesives and Grouts
Vetoset EA454

Water cleanable, chemical resistant waterproof epoxy tile adhesive

Uses
Laying virtually all types of tiles to cementitious and metal substrates
Chemical processing plants
Industrial Kitchens, food plants and hospitals
Swimming pools and aquariums
Fast Download
Technical Information
Product Description

Vetoset EA454 is a three component epoxy based, water cleanable, chemical resistant and waterproofing tile adhesive to be used with most types of tiles including ceramic, porcelain, glass mosaic, marble, granite,...etc. The product is composed of 3 components consisting of resin base, hardener and selected fillers.

Advantages
  • Easy to apply single component
  • Fast return to service and reinstatement
  • Excellent mechanical and physical properties
  • High bond strength
  • High chemical resistance
  • Water cleanable
Compiliance Standard
  • ANSI 118.3 , ANSI 108.6 part 1,2.3 and 4.
  • BS EN 12004:2010 as R2T
  • ISO13007: 2010 as R2T
Packaging & Coverage

Vetoset EA454 supplied in 8 Kg kit, Theoretical Yield:4.5 Liters

Shelf Life & Storage

Original sealed container of Vetoset EA454 has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25ºC.

Colors
Colored Viscous Paste
Application Information
Instructions for use

Mixing

To ensure proper mixing, a mechanically powered mixer or heavy duty slow speed drill fi tted with a suitable paddle should be used. Stir the base and the hardener individually to disperse any settlement. The entire contents of the base and hardener should be poured into a suitable size container and mixed mechanically for 2 minutes. Add the fi ller and mix for another 3 minutes, until a uniform color is achieved.

Application


Apply a thin layer of the adhesive onto the substrate using the fl at edge of the trowel.Comb the adhesive with a suitable notched trowel horizontally to achieve a bed thickness of 2 - 5 mm. Place the tiles with firm pressure to ensure proper contact with the adhesive. It is always better to work in a manageable area that
can be tiled within the open time of the adhesive. Leave the tiled surfaces for 24 hours before grouting.

Cleaning


Tools and equipment can be cleaned with water immediately after use. Hardened materials will require removal by mechanical means.

Surface Preparation

Substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair the quality of bond with the substrate.

Limitation
  • Do not apply at temperature below 12ºC.
  • For heavy traffic areas, it is good practice to back butter the tile back surfaces with the adhesive to ensure 100% coverage.
Additional Information
Health & Sefety

Vetoset EA454 should not come into contact with skin and eyes or be swallowed. Ensure adequate ventilation and avoid inhalation of vapors. Some people are sensitive to resins, hardeners and solvents. Wear suitable protective clothing, gloves, and eye protection. If working in confi ned areas, suitable respiratory protective equipment must be used. The use of barrier creams provide additional skin protection. In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent. In case of contact with eyes, rinse immediately with plenty of clean water and seek medial advice. If swallowed, seek medical attention immediately - Do not induce vomiting. Vetoset EA454 is non-fl ammable.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

 

More Products from this section
Premium FIX

Water resistant premium quality ceramic tile adhesive

 

Vetofill CG550

Professional grade cementitious non sanded tile grout.

 

Vetofill CG551

Polymer modified hygienic cementitious fine non sanded tile grout for hospitals & clinics

Vetofill EG455

Water cleanable, chemical resistant, waterproof epoxy tile grout

Vetofill CG552

Water resistant tile grout for swimming pool, fountain & water tank tile joints.

view more
Featured Product
Vetotop US364

High performance solvent free polyurethane screed for heavy duty applications 

Uses
Heavy duty traffic such as car parks, ramps industrial warehouses, logistical centers,...etc.
Mechanical and chemical exposure applications.
Laboratories, hospitals, food and Beverage industries.
Freezer rooms and applications where thermal shock resistance is required.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map