Primers and Ancillary
Vetonit Solvent XX300

Resin cleaning & thinning solvent

Uses
Clean equipment and tools after use or mixing of epoxy and urethane based resins.
Thinning specific epoxy and urethane products.
Technical Information
Product Description

Vetonit Solvent XX300 is a specially developed solvent blend for use with the resins commonly found in Saveto products and other construction chemicals. Vetonit Solvent XX300 is much more effective than common solvents such as Xylene, white spirit, heavy-naphtha.

Packaging & Coverage

Vetonit Solvent XX300  5 Liter cans, 20 Liter

Shelf Life & Storage

Original sealed  pack  of  Vetonit  Solvent  XX300  has  a shelf life of 12 months provided it is stored clear of ground in a dry well ventilated, and shaded place below 25ºC.

Application Information
Instructions for use

Application

For cleaning tools, it is best to pour some Vetonit Solvent XX300 into a container and to clean the implements within this container.

For cleaning substrates, the solvent can be poured directly, or applied by cloth or paper.

For the thinning application of Saveto products please refer to the product datasheet, and consider the thinning ratio to the original material, or refer to the local Saveto office for further information.

For other products strictly follow the product thinning ratios mentioned in the technical datasheet.

Additional Information
Health & Safety

Health & Safety

Vetonit Solvent XX300 is an industrial grade solvent that should not come into contact  with  skin  and  eyes or  be  swallowed.  Avoid  inhalation  of  vapor and spray. Use only in well ventilated areas. In case    of insufficient ventilation wear suitable respiratory protection. Wear suitable protective clothing, gloves, and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water, and seek medical advice. If swallowed, seek medical attention immediately - do not induce vomiting.

No smoking or naked flames.

Refer to Material Safety Data Sheet for further information.

More Products from this section
Saveto Bond 2

Multipurpose low viscosity bonding agent & admixture

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

Vetobond PB433

Versatile resin adhesive, cement modifier, bonding agent & sealer

Vetobond EB430

Solvent free epoxy bonding agent to bond old to new concrete

view more
Featured Product
Vetofill CG550

Professional grade cementitious non sanded tile grout.

 

Uses
Filling tile joints virtually all types of tiles between 2mm up to 10 mm gaps.
Commercial and residential buildings such as shopping malls, office buildings, palaces and mansions.
Wet areas such as kitchens, bathrooms and swimming pools.
Filling glass block joints.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map