Silane acrylate surface treatment, enhancer and hardener for lime stone, concrete, and masonry
Vetoseal XX777 is a multi-grade surface sealer and hardener for concrete, masonry and natural stone. The product can be used as a film-forming or non-film-forming depending on the grade used. Vetoseal XX777 versatility allows it to be used in various applications on concrete, masonry, lime based elements, cement boards, mineral plasters, natural and artificial stone conglomerates.
Vetoseal XX777 is supplied in 20 Liter Pail
Original sealed bag of Vetoseal XX777 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.
Vetoseal XX777-100 is a concentrated film-forming clear sealer used as a chemical and abrasion resistant sealer for concrete and masonry surfaces: It can be used as a curing compound if applied after 2 hour of concrete pouring.
Vetoseal XX777-75 is the perfect product to seal stained concrete surfaces. The product is also used to protect limestone flooring in exterior environment subjected to traffic. It forms a thin film on the surface which protects the surface from water and chemical damage.
Vetoseal XX777-50 is used as a penetrating sealer/primer for porous stone, concrete and cement based products. Vetoseal XX777-50 is used as a primer and densifier for concrete prior to coating.
Product application will depend on the grade used as per the technical properties table. Refere to Vetoseal XX777 Technical Data Sheet.
Equipment and tools can be cleaned using Vetonit Solvent XX400 immediately after use. Shall residual material exist or harden, mechanical means such as wire brush would be required to remove residue.
Surface must be sound and thoroughly cleaned before Vetoseal XX777 is applied. All loose particles, old mortar, laitence, dirt, paint etc., must be removed by brushing with a stiff /wire brush or other suitable means. Fungi or Algae should be scoured away using hypochlorite type bleach or proprietary fungicidal solution and then washed with water. All traces of oil and grease must be removed with an industrial grade chemical degreaser or another suitable degreasing agent.
Vetoseal XW770 should not come into contact with skin and eyes or be swallowed. Avoid inhalation of vapor and spray. Use only in well ventilated areas. In case of insuffi cient ventilation wear suitable respiratory protection. Wear suitable protective clothing, gloves and eye/face protection. Barrier creams provide additional skin protection. Should accidental skin contact occur, remove immediately with a suitable skin cleanser followed by washing with soap and water. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately - do not induce vomiting. Refer to Material Safety Data Sheet for further information.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Multi-purpose bonding agent & admixture
High Quality Monofilament Polypropylene Fibers
Polymeric soil stabilizer
Polymeric bonding agent, waterproof mix enhancer & primer
Versatile resin adhesive, cement modifier, bonding agent & sealer
High performance, chemical, scratch & UV resistant polyester polyurethane floor & wall coating