Hard-wearing silica aggregates to be used in conjunction of Saveto anti-slip flooring system
Vetograin is specially formulated anti-slip aggregate designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane. Composed of silica sand, which is very hard, and angular and blocky in shape, this aggregate provides long term durability and excellent slip resistant features.
Vetograin Products are supplied in 25kg Bags
Original sealed bag of Vetograin has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.
Slip resistant aggregates can be obtained in a range of sizes from fine through to coarse. The choice of aggregate can depend on the type of coating and also on the degree of slip resistance required. Finer grades of aggregate are conventionally used in thinner coatings, where coarser grades have a tendency to ball up. Coarser grades are more suitable for thicker coatings, where the finer grades would get lost in the coating hence reducing their effectiveness. Coarser grades are generally more suitable for achieving high levels of slip resistance.
The Selected Vetograin aggregates is broadcasted on to the first rolled coat of Saveto resin flooring whilst it is still wet. Sufficient Vetograin anti-slip aggregates should be applied in to completely cover the surface.
When the first coat has dried, the excess aggregate can be removed by brushing or vacuum off the substrate and provided it is still clean and dry can be re-used.
Vetograin should be applied vertically into the resinous flooring to avoid damaging the film continuity of the flooring.
Vetograin is non-flammable and non-hazardous.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Multi-purpose bonding agent & admixture
Multipurpose low viscosity bonding agent & admixture
Polymeric soil stabilizer
Polymeric bonding agent, waterproof mix enhancer & primer
Versatile resin adhesive, cement modifier, bonding agent & sealer
Polyurethane based heavy duty, waterproof and UV resistant car park decking system