Water cleanable, chemical resistant, waterproof epoxy tile grout
Vetofi ll EG455 is a three component epoxy based, water cleanable, chemical resistant and waterproofing tile grout to be used with most types of tiles including ceramic, porcelain, glass mosaic, marble, granite,...etc. The product is composed of 3 components consisting of resin base, hardener and selected fillers.
Vetofill EG455 supplied in 8 Kg kit with Theoretical Yield of 4.5 Liters
Original sealed container of Vetofi ll EG455 has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25ºC.
To ensure proper mixing, a mechanically powered mixer or heavy duty slow speed drill fitted with a suitable paddle should be used. Stir the base and the hardener individually to disperse any settlement. The entire contents of the base and hardener should be poured into a suitable size container and mixed mechanically for 2 minutes. Add the filler and mix for another 3 minutes, until a uniform color is achieved.
Fill the mixed grout into the joints using rubber trowel or by using hand operated gun and cartridges. Excess grout should be cleaned with wet sponge. Cleaning shall be imediately after grouting up to 20 minutes at 22Cº, or before the epoxy hardend.
Tools and equipment can be cleaned with water immediately after use. Hardened materials will require removal by mechanical means.
Substrate should be sound, clean, free from loose material, grease, laitance, dirt, or any other substance that might impair the quality of bond with the substrate.
Vetofill EG455 should not come into contact with skin and eyes or be swallowed. Ensure adequate ventilation and avoid inhalation of vapors. Some people are sensitive to resins, hardeners and solvents. Wear suitable protective clothing, gloves, and eye protection. If working in confi ned areas, suitable respiratory protective equipment must be used. The use of barrier creams provide additional skin protection. In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent. In case of contact with eyes, rinse immediately with plenty of clean water and seek medial advice. If swallowed, seek medical attention immediately - Do not induce vomiting. Vetofill EG455is non-flammable.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Professional grade cementitious non sanded tile grout.
Polymer modified hygienic cementitious fine non sanded tile grout for hospitals & clinics
Cementitious tile adhesive for fixing marble & mosaic tiles.
Antimicrobial cementitious tile adhesive for health related construction
Professional grade adhesive to work with large tile format & multiple types of tiles (C2TE...
Water based surface retarder for concrete